Johnson-level-tool-mfg 40-6543 Manual de usuario descargar pdf (Pagina 13)

Y-Direction Accuracy Calibration

1. Turn the lock knob to the “OFF’ position.

2. Screw off the Y-direction self-calibration aperture bolt located

behind the handle. Adjust the weight screw inside the instru-

ment core with a flathead screwdriver.

3. If point C is above the point O, rotate the screw-

driver counterclockwise. If point C is under the

point O, rotate the screwdriver clockwise.

Note: After the unit is checked in one direction, check the other

direction, until the accuracy of the two directions are both within

specification.

Note: If adjusting screws bottom out and unit is still not calibrated in

X or Y axis, unit will need to be sent in for servicing.

Note: Install the self-calibration aperture screw and rubber stopper

after finishing the accuracy self-check and calibration.

7365H-English_Manuals 10/14/13 2:43 PM Page 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Johnson-level-tool-mfg 40-6543 Manual de usuario Pagina 13