Johnson-level-tool-mfg 40-6522 Manual de usuario

©2010 Johnson Level & Tool - Rev. 1 1Electronic Self-Leveling Rotary Laser Levelwith Integral Vertical MountModel No. 40-6522Instruction ManualCo

10 ©2010 Johnson Level & Tool - Rev. 1Speed AdjustmentAfter unit electronically self-levels, it rotates at its highestspeed. Press the speed adjus

©2010 Johnson Level & Tool - Rev. 1 112. Press the slope mode button again to select Y-direction slope.- Press the button pointing to the left to

Using the Integral Vertical Mounting BracketThe integral vertical mounting bracket allows the unit to be used inthe vertical position on a table or tr

Sound indicator: slow short beep, rapid short beep and continuous soundLED display: down arrow, up arrow, horizontal on grade barDimensions: 6.30"

14 ©2010 Johnson Level & Tool - Rev. 1(b) Display1. Power on symbol2. Low battery indicator3. Fine/Coarse symbol4. Beeper symbol5. Position indica

©2010 Johnson Level & Tool - Rev. 1 154. Operating InstructionsPower OnPress the power key to turn the unit on. TheLCD display will illuminate all

16 ©2010 Johnson Level & Tool - Rev. 1Detecting Laser Level SignalsWhile detecting laser signals, the LCD will display as follows: (takethe set-up

©2010 Johnson Level & Tool - Rev. 1 172. When detecting a vertical laser signal, it isimportant to have the bubble vial centered, asthe deflection

18 ©2010 Johnson Level & Tool - Rev. 18. Self-Check & Fine CalibrationIMPORTANT: It is the responsibility of the user to verify the calibratio

©2010 Johnson Level & Tool - Rev. 1 197. If point C and point D are within 1/32” at 50’, the accuracy iswithin tolerance. Fine Calibration Using t

2 ©2010 Johnson Level & Tool - Rev. 1Table of Contents 1. Kit Contents 2. Features and Functions3. Safety Instructions4. Location/Content of Warni

20 ©2010 Johnson Level & Tool - Rev. 1• Once the desired axes has been selected, the UP arrow and DOWN arrow buttons are used to adjust the positi

©2010 Johnson Level & Tool - Rev. 1 213. Press the button on the remote control to toggle calibration control to the X-axis.4. Press the UP

22 ©2010 Johnson Level & Tool - Rev. 19. Technical SpecificationsLaser Wavelength 635nm±10nmLaser Classification Class IIIaMaximum Power Output ≤5

©2010 Johnson Level & Tool - Rev. 1 23Plumb reference for ceilinginstallationReference for flooring installationReference for window installationR

24 ©2010 Johnson Level & Tool - Rev. 111. Care and Handling• This laser unit is a precision tool that must be handled with care.• Avoid exposing u

©2010 Johnson Level & Tool - Rev. 1 25NOTE: The user is responsible for the proper use and care of the product. It is theresponsibility of the use

26 ©2010 Johnson Level & Tool - Rev. 114. AccessoriesJohnson®accessories are available for purchase through authorizedJohnson®dealers. Use of non-

©2010 Johnson Level & Tool - Rev. 1 32. Features and Functions • Large electronic self-level range: The unit works when within±5°. When beyond the

4 ©2010 Johnson Level & Tool - Rev. 1ATTENTION IMPORTANT• Read all instructions prior to operating this laser tool. Do not remove any labels from

©2010 Johnson Level & Tool - Rev. 1 54. Location/Content of Warning Labels3327H_Manuals 4/23/10 1:09 PM Page 5

6 ©2010 Johnson Level & Tool - Rev. 16. Operating InstructionsIMPORTANT: It is the responsibility of the user to verify the calibration of the ins

©2010 Johnson Level & Tool - Rev. 1 7Alkaline Battery Installation1. Remove battery compartment cover by loosening the bolt with aslotted screwdri

8 ©2010 Johnson Level & Tool - Rev. 1Instrument Usage1. Put in Ni-MH rechargeable battery pack, or 4 “C” alkaline batteries(not included), or conn

©2010 Johnson Level & Tool - Rev. 1 9Power On/Off1. Press the power button to power on. The power indicator lampshould light up and then the instr